RS-RF-SYSTEM-BOARD(without RF module) ... US$26.95
RS-RF-SYSTEM-BiM418 (with BiM418 RF module) ... US$149.95
RS-RF-SYSTEM-BiM433 (with BiM433 RF module) ... US$149.95
RS-RF-SYSTEM-TX (with TX module) ... US$119.95
RS-RF-SYSTEM-RX (with RX module) ... US$119.95
RS-RF-BiM418 (BiM418 RF module only) ... US$126.00
RS-RF-BiM433 (BiM433 RF module only) ... US$126.00
RS-RF-TX (TX module only) ... US$96.95 RS-RF-RX (RX module only) ... US$96.95
The RF (Radio Frequency) module is an electronic module used for wireless communication. It has simple inputs and outputs, allowing for beginners to use it relatively easily. The Charisma board is designed for serial communication using either a BiM, TX2, or RX2 module manufactured by Radiometrix of England. The RF module is an optional product and must be ordered separately. One can communicate between two PC's using two RF boards.
BiM-UHF: The BiM-418-F and BiM-433-F are miniature UHF radio modules capable of half duplex data transmission at speeds up to 40 Kbit's over distances of 30 meters "in-building" and 120 meters over open ground.
Tx and Rx: The TX2 and RX2 data link modules are a miniature PCB mounting UHF radio transmitter and receiver pair which enable the simple implementation of a data link at up to 40 kbit's at distances up to 75 meters "in-building" and 300 meters over open ground.
RF BOARD SPECIFICATIONS:
| Size: |
89mm x 85mm |
| Display: |
LED (for Carrier Detect) |
| Antenna: |
Whip type - 165mm |
| Power |
DC 5V or DC 9V (adapter or battery) |
| Optional kits |
Serial Cable (US$6.50), DC 9V Adapter (US$13.95)
|
RF BOARD FEATURES
-Reasonable price.
-Easy to use.
-Can be connected to any controllers with a RS232C port.
-Transmission and reception mode set by software or manually.
-Carrier Detect (CD) LED indicator.
-Includes terminal block for whip antenna.
-Test pins for Rx (Received Data), Tx (Transmitted Data), and GND.
-Low power consumption.
-DC 5V or DC 9V adapter (option), or DC 9V battery (not provided).
-User's manual.
-Optional serial cable.
- RF Board source code for PC
NOTE: For RF system of HexAvoider kit:
1./ RS-RF-SYSTEM-xxx (RF module with system board) for PC host control)
2./ RS-RF-xxx (RF module only for Hexavoider)
|
